14
7 loose tubes of 2.8 mm
9.4
A security lock or tie-wrap may be inserted through the round
holes in the handle and clamp to lock the closure.
4 loose tubes of 2.8 mm
9.3 Install clamp around dome/base interface. Use the feet of the
clamp handle to close the gap in the clamp.
1
2
3
8 Capacity of baskets
9 Closing the closure
Note: place all unused cable termination hardware in the bag and
store in closure for future cable terminations.
10 Important steps
• Slide the base over the cables.
• Avoid crossing of fibers and loose tubes.
• Multi-out is always through the basket.
• Replace the silicagel after each re-entry.
9.1 Install the hook and loop fastener and “O” ring. Place the silicagel
bag (remove the packaging).
Note
: make sure sealing areas are clean.
9.2 Install the dome onto the base, align the arrow on the dome with
the arrow on the base. The dome should sit flush on the base.
Summary of Contents for FOSC-450A
Page 15: ...15 ...
