2
2.2 Kit content
* Below listed is a standard kit, alternative kits and accessories
are available.
1. Cover and base with latch
2.
Tray
kits
1
pc
3. Splitter
1 pc
4. Cable bracket and screws
4 sets
5.
Adaptors
8
pcs
6.
Transportation
tubs
4
pcs
7. Twist wrap and screw
2 sets
8.
Big
head
screw
4
pcs
9. Smouv
10.
Ring
tree
2
pcs
11. Dummy rod (small)
2 pcs
12. Dummy rod (8mm) &snap block
4 pcs
13.
White
tie
wraps
12
pcs
14. Black tie wraps
4 pc
15.
Clean
tissue
1
pc
16. Installation instruction
3
Installation conditions precautions
3.1 The closures should be installed at temperature
between -5°C and 45°C.
3.2 Follow the installation instruction steps to ensure the
performance of the closure.
3.3 It is necessary to take precautions and keep the
working space clean to protect the closure sealing
materials and splices.
4 Closures
preparation
4.1 Open the closures by unscrew the all screws on the
closure cover, as shown in left below. Then
unlatched two sides, as shown, in right below.
4.2 Open the cover. Then open the tray by press-in the
tray latch, as shown.
4.3 Unscrew the upper clamps where you will install the
cable.
Note:
Prefer to use manual screwdriver or electric
screwdriver in low speed.
