Commonwealth EFTPOS LITE INGENICO 5110, Reference Manual

Page: 14 / 54

13
Credit card transactions
This section describes how to complete a transaction where a credit card is used.
Step Screen Action
1 COMMONWEALTH Swipe the customer’s credit card through the
BANK EFTPOS card reader.
READY
2 TRANSACTION TYPE Select the type of transaction to be conducted.
SELECT TRANSACTION PUR = purchase. REF = refund.
PUR CASH REF
NOTE: Cashout is not permitted on a credit card.
If “Purchase” is selected:
1 PURCHASE: Enter the amount of the purchase and then
$0.00 select OK.
ENTER AMOUNT AND OK
CASH
NOTE: Cashout is not permitted on a credit card. If you press “cash” the credit option
will not appear.
2 PURCHASE Select credit. CR = credit account.
TOT $X.XX
SELECT ACCOUNT
CHQ SAV CR
3 AUD $$$$$$.cc This screen will appear if you have Currency
EXCHANGE RATE N.nnnn Conversion activated on your terminal and the card
XXX $$$$$$$$$ swiped is an overseas card in a currency for which
SELECT 1=AUD 2=XXX the terminal has an up-to-date exchange rate.
<CC> is the 3-digit currency code, e.g. USD for
American dollars. In accordance with international
scheme rules you must give the cardholder the
option of either paying in Australian dollars or their
local currency.
NOTE: Step 3 is only applicable for Currency Conversion transactions.
PROC0164_ADV9805_ELITE.qxd:PROC0164_ADV9805_ELITE.qxd 17/10/08 7:11 PM Page 13