33
Changing passwords (manager and operator)
Passwords are required to access many of the functions to protect you from unauthorised
use of the terminal. There are two password levels available. An operator password allows
you to complete refund transactions up to a certain limit determined by you. The manager
password allows you to access the functions menu and to approve refunds above the
operator limit and below the maximum terminal limit. Remember to change your passwords
regularly. (Terminal will not accept passwords 123456 or 000000.)
Step
Screen
Action
1
COMMONWEALTH
Select the blue Function key.
BANK EFTPOS
READY
2
1. EFTPOS
Select 2. TERMINAL.
2. TERMINAL
3
ENTER PASSWORD
To enter the terminal option menu, the manager
THEN PRESS OK
password is required.
4
1. CONFIGURE
Select 2. PASSWORDS.
2. PASSWORDS
3. REBOOT
4. SAF STORAGE
5
1. MANAGER PASS
Select either 1 or 2 dependent upon which
2. OPERATOR PASS
password you wish to change.
6
MANAGER PWD
Enter new password and select OK. The screen
ENTER
prompt shown is for option 1. The option 2 prompt
NEW CODE AND OK
is operator password.
7
CONFIRM PWD
Enter password and OK. This is to confirm the
NEW CODE AND OK
correct password.
8
PWD ACCEPTED
Password change has been accepted. Select OK
PRESS OK
to continue. Password management menu will
reappear so you can change the other password.
If this is not required select the red cancel key.
PROC0164_ADV9805_ELITE.qxd:PROC0164_ADV9805_ELITE.qxd 17/10/08 7:11 PM Page 33
Summary of Contents for EFTPOS LITE INGENICO 5110
Page 1: ...INGENICO 5110 TERMINAL OPERATOR REFERENCE GUIDE V2 0 EFTPOS LITE...
Page 7: ...6 Terminal layout...
Page 52: ...51...
