background image

Page 14

Limited Warranty

Commercial Pro products are warranted to the original purchaser of new equipment that said equipment, when 

installed in accordance with our instructions within North America and subjected to normal use, is free from defects 

in material or workmanship for a period of 1 year. The labor warranty is one year from original installation or 18 

months from actual factory shipment date whichever date occurs first. Unit must be sent prepaid to Globe Food 

Equipment (“GFE”) for repair. No mileage or travel time is paid. Call for a Return Material Authorization.

THIS  WARRANTY  IS  IN  LIEU  OF ALL  OTHER  WARRANTIES,  WHETHER  EXPRESSED  OR  IMPLIED.    WE 

EXPRESSLY  DISCLAIM ANY  IMPLIED  WARRANTY  OF  MERCHANTABILITY  OR  EXPRESSED  OR  IMPLIED 

WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

COMMERCIAL  PRO’S  PRODUCT  OBLIGATION  AND  LIABILITY  UNDER  THIS  WARRANTY  IS  EXPRESSLY 

LIMITED TO REPAIRING EQUIPMENT WHICH PROVES TO BE DEFECTIVE IN MATERIAL OR WORKMANSHIP 

WITHIN THE APPLICABLE WARRANTY PERIOD.  All repairs pursuant to this Warranty will be performed by Globe 

Food Equipment during normal working hours.  IN NO EVENT SHALL WE BE LIABLE FOR INCIDENTAL OR 

CONSEQUENTIAL DAMAGES TO BUYER OR ANY THIRD PARTY, INCLUDING, WITHOUT LIMITATION, LOSS 

OF PROPERTY,  PERSONAL INJURY, LOSS OF BUSINESS OR PROFITS OR OTHER ECONOMIC LOSSES, 

OR STATUTORY OR EXEMPLARY DAMAGES, WHETHER IN NEGLIGENCE, WARRANTY, STRICT LIABILITY, 

OR OTHERWISE.

This warranty is given only to the first purchaser from a retail dealer.  No warranty is given to subsequent transferees.

This warranty does not cover product failures caused by: failure to maintain, neglect, abuse, damage due to excess 

water, fire, normal wear, improper set up and use.  Periodic maintenance, not covered.

This warranty is not in force until such time as a properly completed and signed installation/warranty registration 

form has been received within 30 days from the date of installation.

Proof of purchase is required if extended more than 1 year from date of shipment from the factory

THE FOREGOING WARRANTY PROVISIONS ARE A COMPLETE AND EXCLUSIVE STATEMENT BETWEEN 

THE BUYER AND SELLER.  COMMERCIAL PRO NEITHER ASSUMES NOR AUTHORIZES ANY PERSONS TO 

ASSUME FOR IT ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH SAID EQUIPMENT.

Example of items not covered under warranty, but not limited to just these items:

 

1. 

Acts of God, fire, water damage, burglary, accident, theft.

 

2. 

Freight damage.

 

3. 

Improper installation or alteration of equipment.

 

4. 

Use of generic or after market parts.

 

5. 

Repairs made by anyone other than a designated servicer.

 

6. 

Lubrication.

 

7. 

Expendable wear parts, adjustable feet, blown fuses, lamps, etc.

 

8. 

Cleaning of equipment.

 

9. 

Misuse or abuse.

Summary of Contents for CPF10















Reviews: