6
Installation (continued)
2
Removing the mounting plate
NOTE:
The mounting plate (D) and mounting plate bolt (C)
come pre-assembled on the light fixture (A) for shipping.
□
Remove the mounting plate (D) from the back
of the fixture by loosening the mounting plate
bolt (C) using the Allen key (CC).
NOTE:
Only unscrew the bolt (C) far enough to remove the
mounting plate (D). Do not fully remove the bolt (C).
CC
C
D
3
Installing the mounting plate
□
Route the junction box wires through the large
center hole in the mounting plate (D).
□
Align the holes on the mounting plate (D)
with the holes on your junction box. Use two
#8 screws (AA), depending on the size of the
holes in your junction box, attach the mounting
plate (D) to your junction box.
□
Please make sure
, the “TOP” is upwards.
□
Use the leveling bubble (F) on the mounting
plate (D) to ensure the fixture is level.
AA
D
4
Hanging the fixture to the
mounting plate
□
Place the small sphere head of the hanger
wire (E) between the back of the small groove
located on the bottom of the center hole of the
mounting plate (D).
□
Ensure the photocell (B) is on the top part of
the fixture (A) when installed.
NOTE:
Ensure the light fixture (A) can safely hang onto the
mounting plate (D) to allow for use of two hands to make the
wiring connections.
E
A
D
B
A
D
E
B
