Audiocodes MP-11x FXO Example Setup Guide v1.6
NOTE: For rapid setup follow all settings suggestions below in
RED
for a typical configuration.
NOTE: This document is for reference only. The configuration examples should work equally with a
serverless or VirtuoSIS based environment. Modifications to the settings may need to be made to
match the needs of the application.
NOTE: All screenshots were taken with firmware 6.60A in the device.
NOTE: For more information on the parameters described below contact Audiocodes the manufacturer of
this device.
MISC: The unit takes approximately 2 minutes to boot up after power is applied. The Ready LED will
illuminate Green.
MISC: To permanently save configuration settings you must “Burn” them by pressing the button at the
top. All non-burned settings will be lost after are power cycle or reboot.
MISC: Some configuration changes require a reboot of the unit. This is performed by choosing ‘Reset’
from the Device Actions at the top. This will n
ot actually “reset” any configuration.
