20
3.6
Remote Controller
Inserting batteries in the remote controller
•
Press the tab on the battery case and open it.
• Insert the battery (1.5V AAA) into the battery case.
• Insert the battery case until clack sounds.
Notice on battery
•
When loading the battery, check if the polarity of the batteries is correct.
• If not using the remote controller for long time, remove the batteries to prevent damage
caused by battery fluid leak.
• Don’t expose the battery to direct sunlight or excessive heat such as a fire.
Notes on the remote controller
•
If anything interrupts in front of IR receiver or between IR receiver and remote controller,
the remote controller may not work.
• If the receiving distance of the remote controller becomes narrow or does not work,
replace the battery with new one.
• In case of the product is exposed to direct sunlight or fluorescent light, it may not operate.
3.7
Setup
Turning on the power
1. Connect the power cable of the product into outlet with AC 100-240V 50 / 60Hz.
2. Turn on the main AC power switch.
3. If the power indicator is green, the screen turns on automatically.
4. If the power light is red not green, press the power key on the remote controller or
operate to turn on the power.
Changing language of the menu
•
The language of the menu is basically English as the default set.
• Users can select a language
•
To change the menu language,
1.
Press the Menu button to go to the menu.
2.
Select the OSD from the main menu.
3.
Select the language of the OSD setup menu.
4.
Select the language you want to select, and then exit the menu.
