CommBox Joey Micro, User Manual

Page: 7 / 12

+61 2 9975 6001
7
1133 nec_192_Alt_Vol_u9.jy Same as above with alternative volume
commands
1134 nec_384_Alt_Vol_u9.jy Same as above with alternative volume
commands
1141 panasonic_1_u9.jy Non-Sanyo models
1142 promethean_1_u9.jy
1143 sanyo_1_u9.jy Universal Sanyo app
1144 sharp_1_u9.jy
1211 ToGen1_USB_U9.jy
CommBox 1 generation and FHD models
st
prior to 2017
1212 Touch_4k_2017_USB_u9.jy CommBox 4k models dated 2017 and until
advised.
1213 Touch_4k_USB_U9.jy CommBox 4k models dated prior to 2017.
1214 Touch_Gen1_USB_u9.
jy
FHD models dated 2017 and later. Also 1
st
gen. models
Note: this table matches the binaries loaded into the product at the time this manual was
packed. The list is subject to change at any time as new models are introduced and may be
incorrect for later or earlier binary sets. So, do not lose this manual!
4 Custom Programming Using Joey
Editor – Tips
Unless there is a very good reason not to, set all keys to Hot Keys (yellow circle). This
saves you time and helps avoid oversights.
Use Timer for delays, not Wait. Wait is a blocking delay and is there mainly for
compatibility with early firmware, i.e. 1.04 and older..