4
+61 2 9975 6001
The Multi I/O and Relay Driver connectors are plug-compatible with earlier-model
Joeys.
A range of projector serial cables, IR emitters and the programming cable are
available from CommBox.
3 Reset Button
This button (see diagram above), accessed through a small hole, is used for six distinct
functions depending on when and how long it is pressed. The reset button hole may be
hidden behind the label, but you should be able to feel where the hole is through the label.
Time
held
(sec)
LEDs
shown
Function performed
During
power-up
N/A
Enter firmware upgrade mode (via USB) - Not covered in this
manual.
For the following modes, ensure that the Joey is turned on before pressing the reset
button. LEDs will progressively light as you hold the reset button to show the mode you
have reached.
Less
than 1
second
N/A
Reset unit – (same as a power cycle).
