Commax DRC-703LC/RF1 User Manual Download Page 3

Page: 3 / 68

Please follow the things described below in order to prevent any

danger or property damage.

Warning

Caution

Prohibition.

No disassembly

No touch

Must follow strictly.

Shows plugging out the power cord

without an exception
Shows the warning and caution for an electric shock.

Shows the warning and caution for a fire.

It may cause a serious damage or

injury if violated.

It may cause a minor damage or

injury if violated.

tio

Warning

Please don

’

t use several

products at the same time on

one power socket.

It may cause a fire due to an

abnormal overheating.

Please don

’

t bend the power

cable excessively or it may

cause an electric shock.

fire when using a damaged

power cable.

Please don

’

t handle the

power cable with a wet hand.

It may cause an electric

shock.

Please plug out the power

cable from the socket when

not using it for a long period

of time.

It may shorten the product

lifespan or cause a fire.

Please don

’

t install the

product in the place where

there is much oil, smoke or

humidity.

It may cause an electric

shock or fire.

Please don

’

t install the

product with the lightening

and thunder.

It may cause an electric

shock or fire.

Please don

’

t use and connect

this product with other

products with different rated

voltage

It may cause a disorder or

fire.

When installing the product

that generates heat, please

install the product away from

the wall (10cm) for the

ventilation.

It may cause a fire due to

the increased internal

temperature.

1. Safety Warning & Caution

Summary of Contents for DRC-703LC/RF1





































































Search results

Summary of Contents for DRC-703LC/RF1

Reviews:

Related manuals for DRC-703LC/RF1

Brands by name

Popular brands

Commax DRC-703LC/RF1, User Manual

Search results

Summary of Contents for DRC-703LC/RF1

Reviews:

Related manuals for DRC-703LC/RF1

Brands by name

Popular brands