4
5
3. Names and function of each part
4. Operational functions
NO
Description
①
Speaker
②
FND display unit
③
Ten key
④
PRIVACY function
⑤
LOCK(Hands-free communication)
⑥
TALK(Conversation)
⑦
Receiver Volume Control
⑧
Call Sound Volume Control Dial
⑨
MIC
-1 Name of eac part of CM-810M
4-1 Setting methods before usage and precautions
1) Setting of Melody ID
- If you press for 2 seconds button “ * ”, beep voice will sound and bell
sound will enter setting mode.
- Word “Sd (SOUND)”will be shown in Display window, and current
number of melody (initial number: 01) will flicker.
- At this moment, if you press 1 or 2, appropriate melody will be in effect.
- After melody is selected, push button “ # ”and finish melody selection.
- By pressing melody selection and button “ # ”, device will be
automatically enter to ID setting mode
- ID in display window, and current ID (initial number: 01) will be
sequentially flickered.
- After setting of ID is done, press “ # ”and setting for use will be over.
2) Precautions
- Setting of ID should be done from 1 to 10 according to wiring state.
- In order to go over among Melody and ID setting, press “ * ”.
(Example): For setting only ID : pressing about 2 seconds button “ * ”+
button “ * ”+ set ID button “ # ”
For setting only melody: pressing about 2 seconds “ * ”+ Number of
setting button “ * ”
- After entering into setting mode, if you do not press any button for 10
seconds, it will automatically go to initial state.
5-2 Master Station_CM-810M How to use, guidelines for CM-810M
** When you want to call and begin to talk
1) Press ID number of device to be called and then press button “ # ”.
2) If bell lasts over 1.5 seconds, conversation mode automatically opens.
Example: Calling to ID number 1: press “ 1 + # (Bell sound will occur) ”
- When you press wrong number, error beep sound will occur.
(It is possible to call from 1 to 10, and impossible to call into its ID
number).
- When you enter wrong number, press “ * ”and it will be annulated.
3) When calling, press Talk button and speak, release Talk Button, when
listening.
When talking is over, press again button「#」and finish conversation.
** When you are called from other unit and want to speak
1) If there is a call coming from another unit, you will see in display
window “A(call)”words appear, after 1.5 seconds it get automatically in to
speaking mode with appearing of “N”in display.
2) During of transmission it is possible to talk without handling any button.
3) If you press privacy button, it will be impossible to make eavesdropping
over master unit.
•Receiver Volume Control: Regulating of voice of opponent, coming from
outside.
•Calling Out Volume Control: it regulates volume of calling sound.
•PRIVACY Button: when this button is pushed, even under communication,
voice of this person will not be transmitted to the other party.
(preventing of eavesdropping is possible)
As CM-810M does not have a handset, you should press “Talk”button, during
conversation, and press again one more time “Talk”button in order to finish
conversation.
