6
7
5. Wiring
6. Power Specifications
This product’s composition schema is different by distance of power supply units and quantity
of installing intercom units.
6-1 When we use only one RF-1A(DC12V/1A) (distance 50M)
- In case of usage of 12V/1A as it is in picture, maximum 4 units will be connected.
- It is needed to wire adaptor and first CM-810M at maximum closest way within 1 meter.
- It will possible to wire in parallel way by every 50 meters.
6-2 When we use only one RF-1A(DC12V/1A) (Distance 100M)
- It is needed to wire adaptor and first CM-810M at maximum closest way within 1 meter.
- A distance between first and second units of CM-810M will be about 100 meters.
6. Power Specifications
5-1 Wiring method
- This product use LINE CORD terminal for wiring.
1) Terminal 10P: It connects with LINE CORD 10P CONNECTOR.
Number of this unit will be connected to terminal “L”.
2) Terminal 4P : It connects with LINE CORD 4P CONNECTOR.
( + , - , L1 , L )
** It is recommended to use Adaptor 12V Trans Type.
This product’s composition schema is different by distance of power
supply units and quantity of installing intercom units.
6-1 When we use only one RF-1A(DC12V/1A) (distance 50M)
- In case of usage of 12V/1A as it is in picture, maximum 4 units will
be connected.
- It is needed to wire adaptor and first CM-810M at maximum closest
way within 1 meter.
- It will possible to wire in parallel way by every 50 meters.
- It is needed to wire adaptor and first CM-810M at maximum closest
way within 1 meter.
- A distance between first and second units of CM-810M will be about
100 meters.
This product’s composition schema is different by distance of power supply units and quantity
of installing intercom units.
6-1 When we use only one RF-1A(DC12V/1A) (distance 50M)
- In case of usage of 12V/1A as it is in picture, maximum 4 units will be connected.
- It is needed to wire adaptor and first CM-810M at maximum closest way within 1 meter.
- It will possible to wire in parallel way by every 50 meters.
6-2 When we use only one RF-1A(DC12V/1A) (Distance 100M)
- It is needed to wire adaptor and first CM-810M at maximum closest way within 1 meter.
- A distance between first and second units of CM-810M will be about 100 meters.
6. Power Specifications
6-2 When we use only one RF-1A(DC12V/1A) (Distance 100M)
- It is needed to wire as closest as possible first CM-810M with power
within 1 meter.
- Second and third CM-810M should be connected to each other in
parallel way and installed in every 50 meters.
- After installing first CM-810M unit in 100 meters distance from fourth
CM-810M unit, turn on second power supply.
- Place fourth unit of CM-810M maximum close to the power supply
unit, within 1 meter.
- Place fifth and sixth CM-810M units by 50 meters distance from
each other in parallel way.
- Place first CM-810M and power supply unit within 1 meter in wiring.
- Please place first CM-810M and second CM-810M within 200M
distance and turn on the power.
- Please install second CM-810M Unit and power supply unit within 1
meter.
6-3
When we use two RF-1A (
DC12V/1A). (Distance 50M / 100M)
- It is needed to wire as closest as possible first CM-810M with power within 1 meter.
- Second and third CM-810M should be connected to each other in parallel way and installed
in every 50 meters.
- After installing first CM-810M unit in 100 meters distance from fourth CM-810M unit, turn
on second power supply.
- Place fourth unit of CM-810M maximum close to the power supply unit, within 1 meter.
- Place fifth and sixth CM-810M units by 50 meters distance from each other in parallel way.
6-4 When we use 2 pieces RF-1A(DC12V/1A) (distance 200M at maximum)
- Place first CM-810M and power supply unit within 1 meter in wiring.
- Please place first CM-810M and second CM-810M within 200M distance and turn on the
power.
- Please install second CM-810M Unit and power supply unit within 1 meter.
6-3
When we use two RF-1A (
DC12V/1A). (Distance 50M / 100M)
- It is needed to wire as closest as possible first CM-810M with power within 1 meter.
- Second and third CM-810M should be connected to each other in parallel way and installed
in every 50 meters.
- After installing first CM-810M unit in 100 meters distance from fourth CM-810M unit, turn
on second power supply.
- Place fourth unit of CM-810M maximum close to the power supply unit, within 1 meter.
- Place fifth and sixth CM-810M units by 50 meters distance from each other in parallel way.
6-4 When we use 2 pieces RF-1A(DC12V/1A) (distance 200M at maximum)
- Place first CM-810M and power supply unit within 1 meter in wiring.
- Please place first CM-810M and second CM-810M within 200M distance and turn on the
power.
- Please install second CM-810M Unit and power supply unit within 1 meter.
6-3 When we use two RF-1A (DC12V/1A). (Distance 50M / 100M)
6-4 When we use 2 pieces RF-1A(DC12V/1A) (distance 200M at maximum)
