Commando AirONE APO300 Configuration Manual Download Page 5

Page: 5 / 92

separate LAN port

• LED Indicators: Power, LAN/WAN (Link/Act)

• Reset Button

Extra Long operational life

• Dual input Power Either DC 12V/1.5A or 24V PoE via WAN port.

• High Quality PCB Circuit Board and PCB Surface Treatment Using Gold Sinking Process.

• Support temperature range 0° C to 50° C

• Desktop and Wall mount design that enables to mounts Which enables horizontal and
vertical wall mounting.

• Comes with one-year default warranty – optionally extendable up to 3 years.

Noise-free Operation

• The ports support reduced power modes for silent operation. Perfect for noise sensitive
environments.

Software Highlights

• Multiple Operational Modes like Gateway, Super WDS, Repeater, WISP and AP mode (D
efault mode).

• Multiple SSID with Up to 4 SSIDs with VAP.

• Supports IEEE 802.11b/g/n 2.4GHz with Antenna RF input Power of 30dBm.

• Support wireless RF power adjustable as per user movements from AP.

• Access end users up to 64 max with concurrent 50 end users.

• Support tag VLAN and VLAN management.

• Supports intelligent load balance based on users.

• Support seamless roaming and low-rate terminal access.

Summary of Contents for AirONE APO300





























































































Search results

Summary of Contents for AirONE APO300

Reviews:

Related manuals for AirONE APO300

Brands by name

Popular brands

Commando AirONE APO300, Configuration Manual

Search results

Summary of Contents for AirONE APO300

Reviews:

Related manuals for AirONE APO300

Brands by name

Popular brands