Commando AirONE APO300 Configuration Manual Download Page 6

Page: 6 / 92

• Support inbuilt WI-FI channel analysis.

• Internal Antenna enabling maximum client density deployments with no interference.

• Supports Wi-Fi client distance up to 400 meters (1312 feet) in all directions and above
depending on surrounding conditions.

• Support Open or encryption like WPA/WPA2PSK_TKIPAES.

How to take access of COMMANDO AirONE APO300?

1. Wired access Via LAN port connected to PC.

Power ON AirONE APO300.

Connect LAN port of AirONE APO300 to PC via RJ-45 cable.

Open Network and sharing center.

Go to Change adapter settings.

Double click on Local Area Connection. Go to Properties. Double click on Internet
Protocol Version 4 (TCP/IPv4) option and set any IP address from 192.168.188.1 to 252
and Gateway of PC to be set as 192.168.188.253 to as shown below.

Summary of Contents for AirONE APO300





























































































Search results

Summary of Contents for AirONE APO300

Reviews:

Related manuals for AirONE APO300

Brands by name

Popular brands

Commando AirONE APO300, Configuration Manual

Search results

Summary of Contents for AirONE APO300

Reviews:

Related manuals for AirONE APO300

Brands by name

Popular brands