Command Light CL602D, User Manual

Page: 9 / 46

USER GUIDE
8
Operation
Raising the light from the nested position
Using the control box, raise the lower or upper stage. You may also activate both stages
simultaneously. Control switches are of momentary action style and must be held in the
“on” position to actuate the stages.
The COMMAND LIGHT has an override system that precludes rotation of the upper stage
until the lower stage has elevated approximately 16" from the nested position. When the
lower stage is below 16" the following conditions exist:
• Upper stage is prevented from rotating.
• All lights are turned off, including strobe light if equipped, regardless of light switch positions.
• Prevents the upper stage from moving down if upper stage is not centered.
If the supply from the generator is marginal, position the COMMAND LIGHT before turning on lights.