Command Communications ASAP 104 Page 36 Installation And Reference Manual Download | Manualshive

Page: 36 / 40

background image

36

═════════════════════════════════════════════════════════════════

Primary Port Selection

Operates in either the Automatic mode or the Semi-Automatic mode.

This feature designates where the call is routed when tone transfer codes are not detected in the Automatic mode, or any
inbound call when the ASAP 104 is in the Semi-Automatic Mode. Calls can be designated to any of the 4 ports other than
the

Secondary Primary Port Selection

. Any of the 4 ports can be designated as the Primary Port. One port cannot be

designated to be both the Primary Port and Secondary Port.

The factory setting for Primary Port Selection is port P1 [ # *

(three beeps) 7 1 1 * (three beeps) * (one beep)

].

To select transfer to port P2:

1. Take the phone in port P1 off-hook

* (three beeps)

* (one beep)

2.

Press

# * (three beeps) 7 2 1 * (three beeps) *

(one beep)

3. Hang up the phone

To select transfer to port P3, press

# * (three beeps)

7 1 3 * (three beeps) * (one beep)

To select transfer to port P3, press

# * (three beeps)

7 1 4 * (three beeps) * (one beep)

═════════════════════════════════════════════════════════════════

Secondary Port Selection

Operates in either the Automatic mode or the Semi-Automatic mode.

This feature designates where the call is routed when the

Automatic No Answer Transfer

feature or the

Primary Port

Transfer

feature is activated.

The factory setting for

Secondary Port Selection

is port P2 [

# * (three beeps) 7 2 2 * (three beeps) * (one beep)

].

To select transfer to port P1:

1. Take the phone in port P1 off-hook

2. Press

# * (three beeps) 7 2 1 * (three beeps) *

(one beep)

3. Hang up the phone

To select transfer to port P3, press

# * (three beeps)

7 2 3 * (three beeps) * (one beep)

To select transfer to port P3, press

# * (three beeps)

7 2 4 * (three beeps) * (one beep)

«
...
34
35
36
37
38
...
»

Summary of Contents for ASAP 104









































Reviews:

No comments

Related manuals for ASAP 104

Brand: 3Com Pages: 2

Brand: 3Com Pages: 57

Brand: 3Com Pages: 2

Brand: IDEAL Pages: 6

Brand: IdeaFly Pages: 3

Brand: Q-See Pages: 28

Brand: Vaillant Pages: 80

Brand: Panasonic Pages: 10

Brand: Öhlins Pages: 2

Mechatronics 35007-01

Brand: Öhlins Pages: 4

McPherson Strut MIR 5H02

Brand: Öhlins Pages: 2

Brand: Öhlins Pages: 4

iBoard IB-ZK406

Brand: APS Auto Parts Specialist Pages: 3

Brand: Adam Pages: 22

Brand: BS Bodensteckdosen Systemtechnik Pages: 14

Brand: hepco & becker Pages: 6

KARLSUDD TRAVEL BED

Brand: Carena Pages: 8

Brand: FORM FIT Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands