manualshive.com logo in svg

Command Communications ASAP 104, Installation And Reference Manual, Page: 27 / 40

Share
Download
Command Communications ASAP 104 Installation And Reference Manual Download Page 27

 

 

27

═════════════════════════════════════════════════════════════════

 

Single Tone Detection 

 

Operates in either the Automatic mode or the Semi-Automatic mode. 
 
This feature allows the ASAP 104 to detect single frequency tones (for the duration of the 

Single Tone Detection Timer

) from 

various data devices. It recognizes the following tones: 
 

• 

1100Hz Fax CNG tone (if turned ON) 

• 

1300Hz modem calling tone (if turned ON) 

 
Operation in the Automatic mode and Semi-Automatic mode vary as follows: 
 

Automatic mode 
 

Once the ASAP 104 answers a call, it will listen for and transfer calls when a single frequency tone is detected. The 

Single Tone 

Detection Timer

 begins when the ASAP 104 answers the call. After the timer expires, the ASAP 104 will only transfer using the 

tone access codes. 
 

Semi-Automatic mode 
 

The 

Single Tone Detection Timer

 begins when the call is answered. Once the call is answered, the ASAP 104 will listen for and 

transfer calls when a single frequency tone is detected. After the timer expires, transfers will require tone access codes. 
 
The factory setting for 

Single Tone Detection

 is ON. 

 
To turn this feature OFF: 
 
1. Take the phone in port P1 off-hook 
2. Press 

# * (three beeps) 0 9 *  (three beeps) * (one 

beep)  

3. Hang up the phone 
 

To turn this feature ON: 
 
1. Take the phone in port P1 off-hook 
2. Press

 # * (three beeps) 1 9 *  (three beeps) * (one 

beep)  

3. Hang up the phone 

 
NOTE: This feature supersedes the following features: 

Fax CNG Detection, Modem Calling 

Tone Detection.

  If 

Single Tone Detection

 is turned OFF, these features will not operate even if they are programmed ON. 

 
 

═════════════════════════════════════════════════════════════════

 

Fax CNG (Calling) Tone Detection 

 

Operates in either the Automatic mode or the Semi-Automatic mode. 
 
This feature allows the ASAP 104 to detect an 1100 Hz Fax CNG tone. 
 
Operation in the Automatic mode and Semi-Automatic mode varies as follows: 
 

Automatic mode 

Once the ASAP 104 answers a call, it will listen for and transfer calls when a CNG tone is detected. 

 

Semi-Automatic mode 

Once a call is answered, the ASAP 104 will listen for and transfer calls when a CNG tone is detected. 

 
The factory setting for 

Fax CNG Tone Detection

 is ON. 

 

To turn this feature OFF: 
 
1. Take the phone in port P1 off-hook 
2. Press 

# * (three beeps) 0 1 0 *  (three beeps) * 

(one beep)  

3. Hang up the phone 
 

To turn this feature ON: 
 
1. Take the phone in port P1 off-hook 
2. Press 

# * (three beeps) 1 1 0 *  (three beeps) * 

(one beep)  

3. Hang up the phone 

Summary of Contents for ASAP 104









































Reviews:

No comments