COMM-TEC Germany www.comm-tec.de
1
UP-1200 Presentation Switcher/Scaler
Chapter One: Overview
The UP-1200 is a new generation of scalers that
can switch different types of signal input to an
HDMI and HDBase output. It has 9 different input
video signal sources: CVBS,(Y,Pb/Cb,Pr/Cr),
VGA, HDMI and HDBaseT signals can be
converted
and
switched
to
unified
HDMI/HDBaseT signal outputs at an user-
defined output resolution.
The UP-1200 also supports 9 unbalanced analog
stereo audio inputs. The HDMI inputs and
outputs support audio embedding an de-
embedding. For controlling purposes the scaler
offers front panel buttons, RS232, IR and
Ethernet control as well as HDBaseT remote
control. Therefor the UP-1200 can be widely
used in broadcast environments, conference
rooms, education facilities, command and control
centers and other occasions.
1.1 Features
Supports 9 video signal inputs:
1x CVBS, 1xY,Pb/Cb,Pr/Cr, 2x VGA, 3x
HDMI, 1x DisplayPort, 1xHDBaseT input;
2 video signal outputs:
1x HDMI,1x HDBaseT
9 analog audio inputs
unbalanced stereo, 20Hz~20KHz;
stereo audio amplifier output:
2x20W@4Ω
Each audio input has a coarse volume ,
the output has a fine volume control;
Input and output resolution can be up to
WUXGA (1920x1200)
Seamless switching without a blank
screen or sync loss.
Support for HDM 1.2a, HDCP1.3, Display
Port 1.1
Audio embedding and de-embedding for
HDMI inputs and outputs
Brightness and contrast adjustment
Auto adjustment for VGA inputs
EDID manager
.
1.2 Installation
The UP-1200 can be installed on the standard
19-inch racks as shown below:
