4K 4x4 HDBaseT Matrix Switcher
Comm-Tec S.r.l.
15
www.comm-tec.it
Usage of IR Remote
4.1.2.1.
Switching I/O connection
1.
To convert one input to an output:
Example: Input 1 to Output 3
→Press INPUTS 1 + OUTPUTS 3 + ENTER
NOTE:
Default status, on first boot up this matrix assigns the IR outputs to the
corresponding HDMI input, meaning, IR out 1 is directly associated to HDMI
input 1 and so on. When you switch an HDMI input to a different output, the
corresponding IR OUT will be switched synchronously to allow the IR
commands to be sent from the select zone back through the Matrix
Switcher to the source.
2.
To convert an input to several outputs:
Example: Convert Input 2 to Output 3 and 4
→Press INPUTS 2 + OUTPUTS 3 + OUTPUTS 4 + ENTER
3.
To convert an input to all outputs:
Example: Input 1 to all Outputs
→Press INPUTS 1 + ALL + ENTER
4.1.2.2.
EDID Management
The 4K Home Distribution Hub Kit features EDID management that enables the Matrix
Switcher to learn the EDID of all sources and sink devices. The Matrix Switcher can
learn the EDID from any device or be programmed to assign an EDID to the mirror port
through EDID Invoking.
1.
EDID Learning
（
from output
）
:
One input port learns the EDID data of one output port:
Example: Input 2 learns EDID data from output 4
→Press EDID + INPUTS 2 + OUTPUTS 4 + ENTER
All input ports learn EDID data from one output port:
Example: all input ports learn EDID data from output 4
→Press: EDID + ALL + OU ENTER
2.
EDID invoking:
There are five types of embedded EDID data. The chart below illustrated the detailed
information of the embedded EDID data:
