4K 4x4 HDBaseT Matrix Switcher
Comm-Tec S.r.l.
9
www.comm-tec.it
This then emits the IR signal received from the HDBaseT
Receiver. There are 4 IR OUTPUT sockets marked on IR
matrix.
④
OUTPUTS
HDBaseT:
The HDBT RJ45 outputs deliver HD video,
Audio and PoC to the HDBaseT Receiver up to 70m.
HDMI:
Connect an HDMI cable from the Matrix
Switcher to the displayer.
SPDIF:
Digital audio output connects directly via an
optic fibre cable to the Toslink input on a sound bar.
RCA (L&R):
PCM Analogue audio output sockets
connect the de-embedded audio additional speakers.
⑤
Control
TCP/IP:
RJ45 port. Connect with PC for Web-based
GUI control.
RS232:
Serial port for unit control, 3-pin pluggable
terminal block, connects with control device (e.g.
PC).
⑥
DC 24V
Connect with DC24V 2.71A power adaptor.
Note:
Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.
2.2
HDBaseT Receiver
1.
Front Panel
No.
Name
Description
①
HDMI OUT Connect to HDMI display.
②
IR IN
Plug in the IR receiver, this will receive the IR signals from the RCU
and send through to the Matrix Switcher and then control the
desired source.
③
IR OUT
Plug in the IR emitter and attached to the fornt of the display, this
will send the IR signals form the Matrix Switcher to control the
display which is connected to the HDMI OUT port.
IR IN
IR OUT
HDMI OUT
1
2
3
