Comfort365 Thermostat
Remote Wireless Temperature Sensors
When two or more wireless Comfort365 installations are within
300-feet of each other, the C365 thermostat and remote wireless
temperature sensors must be set to different Home numbers so
they do not interfere with one another.
Use Installer Option 54 in the thermostat installer manual to set
a new Home number in the thermostat.
Remove one of the batteries to remove power to the sensor.
While pressing the push button switch on the sensor, re-install
the battery. The LED will blink red once, then two rapid blinks,
then three rapid blinks and so on. Release the switch after the
number of blinks corresponding to the Home number to be set.
Changing the Home number does not affect the assignment as
the #1 or #2 sensor.
The TS5WL is factory set as #0 wireless temperature sensor and
needs to be set to #1. If two temperature sensors are used, set
the address number on the second sensor to #2. The sensor
location needs to be documented for future reference. Use the
removable labels included with the thermostat to identify the
sensors as #1 or #2. Place the labels on the front of the
thermostat over the battery cover.
Push Button
Switch
LED Indicator
Press the push button and the LED will blink once, then twice
and repeat this pattern. To set the sensor as the #1 sensor,
release the push button switch after one blink or after two blinks
to set it as #2 sensor. After releasing the push button, the LED
will blink yellow once to indicate successful communication or
blink red indicating that communication was not successful.
1 Blink = #1 Sensor
2 Blinks = #2 Sensor
After setting the sensor number, power can now be applied
to the Wiring Hub. The Wiring Hub will automatically detect
the Radio and the sensors being used when powered up.
!
INSTALLER
Setting Wireless Sensors as #1 or #2
Selecting a Different Home Number
The following pages include wiring diagrams and
options for different types of installations:
Wiring Diagram - Installation using wired temperature
sensors - Ideal for RNC.
Wiring Diagram - Installation using wireless temperature
sensors - Ideal for Replacement.
WIRING DIAGRAMS
