22
104570
DIRECT-VENT FIREPLACE (NATURAL/PROPANE)
CDV37N/P AND CDV41N/P
INSTALLING OPTIONAL
BRICK LINER CD8037/CD8041
WARNING: If fireplace has
been running, turn off and un-
plug fireplace. Let cool before
installing brick liner.
This brick liner kit is optional. You may
purchase brick liner from your local retailer
or see Accessories, page 33.
CAUTION: Always handle
brick panels with two hands. Do
not force brick panels into place.
Excessive force will break brick
panels.
1.
Remove screen and glass door. See Re-
moving/Replacing Screen and Glass
Door, pages 21 and 22.
2.
If installing brick liner in new fireplace,
go to step 3. If installing brick liner in
an existing fireplace, carefully remove
logs, lava rock, and ember material.
3.
Install rear brick panel first. Rest bot-
tom edge of panel on back edge of grate
(see Figure 45, page 23).
4.
Loosely secure retainer brackets to
grate. Brackets are adjustable left to
right to allow proper placement of
panel. These will hold rear panel in
place while installing side panels.
Figure 43 - Removing/Replacing Screen
Figure 44 - Removing/Replacing Glass Door
Screen
Lower Bracket
for Screen
Screen Clip
Glass Door
Assembly
Screw
Lower Bracket for
Glass Door Assembly
FIREPLACE
INSTALLATION
Continued
Attaching Magnetic Decorative
Brass Strips
This fireplace comes with a set of two
magnetic decorative brass strips. Before
attaching strips to fireplace, remove plastic
film from brass pieces. After installing both
the door and the screen, attach these strips to
the glass door frame just above and below
the screen.
