Clima Flex Two-pipe One-way Cassette
CLIFC-W 201506
22
Cutting the ceiling
Fold the installation paper plate.
Caution:
Folding direction is bulged out from the no printing content side;
Use the panel fixing screws to fix the installation paper plate under the indoor unit;
Make the ceiling opening size be the same with the outboard size of the model paper;
Make sure the difference between the lower sides of the ceiling and model paper plate to be about
24mm, if not fit the requirements then means the hoisting height has problem;
Please back to the above steps to re-adjust.
Panel component installation
Remove the air return grille, filter screen, screw hidden cover.
As the grille switch arrow indication direction to pull the lock catch, remove the air return grille.
Pull the buckle as figure display, remove the filter screen.
Open the air leading bar, remove three screw hidden covers.
Take down the air return grille, filter screen, screw hidden cover and please safely keep them, do not
lose, dirt and damage them.
