11
Receiver DE10
Pairing (Connector DT10)
The connector cannot send information, only receive it.
1. To activate the position
Receive info
, the connector
must be in operation (position I or II) and connected to
an operating hearing aid.
2. The selector is then quickly moved to position 0 and
back to the operating position (I or II). The connector
can now receive pairing info.
3. If no info is received by the connector, after a short
time this returns automatically to the previous
setting.
Units with both transmitters and receivers built in
Comfort Digisystem units with both transmitters and receivers built-in
can be paired separately.
When opening the pairing menu, choose the concerning unit (transmit-
ter/receiver). In units with both transmitters and receivers, the pairing
button controls the transmitter.
The transmitter and receiver are paired separately in these units. The
code key is always the same for the transmitter and the receiver when
these are built-in in the same unit.
The easiest way to get the same code key in the whole Digisystem is to
generate a new code key from the combined unit; in that way the built-in
receiver gets the same code as the rest of the system.
