10
Receiver DE10
Pair
Receiver DE10 must be paired using the pairing button, see section
Pairing (via pairing button)
.
Pairing
To use a receiver and transmitter together, they must be paired. All
transmitters and receivers are default paired at the factory and will work
together.
NB!
To prevent eavesdropping, a new code key must be generated and
transmitted between the units by pairing.
Transmitting/receiving of pairing information along with a new code can
be performed from any Comfort Digisystem unit with a display.
To pair units without a display, see sections
Pairing (via pairing button)
and
Pairing (Connector DT10)
. Pairing information or a new code key can
be received by several activated units.
Pairing (via menu)
1. Choose
Communication - Pair
2. Select
Receive info
on one unit.
Ready to receive
pairing info
is shown in the display.
3. Select
New code
on the other unit; select
Yes
.
4.
Generate new code and send info?
is shown in the
display. Select
Yes
(Now both the channel and the
coding information have been sent, and sound
transfer is eavesdrop-secure).
5. To pair another unit into your coded system, select
Send info
instead on one of your paired units.
Pairing (via pairing button)
(The only way of pairing units without a display, with the pairing button)
You can activate the Pairing function via the pairing button.
1. One brief press of the button opens the
Pairing
menu.
2. Two brief presses activate the
Send info
function.
3. One long press activates the
Receive info
function.
