9
Receiver DE10
Change code
When the pairing button is pressed for 10 seconds, the function indicator
shows a constant red light. Now release the pairing button, the function
Change code
is activated.
Press the pairing button quickly 2 times to generate a new code; at the
same time the pairing information is transmitted (make sure that the
other Digisystem units which should be paired are activated to receive
pairing information).
The function indicator flashes red 5 times, pairing information (code and
channel) has been sent
Factory Reset
When the pairing button is pressed for 20 seconds, the function indicator
will switch to alternating red and green light. The
Factory Reset
function
is activated.
To perform a factory reset, press the pairing button quickly one time.
The function indicator flashes the number of times corresponding to the
channel; see chapter
Radio Range and Channels.
The channel and the code are now reset to the factory settings.
Activating max volume
Choose your max volume with the volume buttons; then press the pair-
ing button and shortly after the volume [-] button. Keep both buttons
pressed for about 10 seconds until the function indicator flashes green 5
times. Now the volume cannot be raised above the installed max volume.
Deactivating max volume
Press the pairing button and shortly after the volume [+] button. Keep
both buttons pressed for about 10 seconds until the function indicator
flashes red 5 times. Now the volume can be raised as much as you want.
Factory reset deactivates max volume