IE-SNC-P2520-02
8
•
the window shows all available devices on your network
•
click to
Change IP
to set new address according to network administrator
instructions. If your device is not listed, then click
Help! My device wasn’
t
found!
Then follow the instructions. MAC address is on product label. The
device is factory set to IP
192.168.1.213
.
•
gateway may not be entered if you want to use the device in local network only.
If you set the same IP address which is already used, the device will not work
correctly due to IP address collision. If the device detects a collision of IP
address, then reboot is performed automatically.
•
after changing IP address device is restarted and new IP address is assigned.
Restart of the device takes up to 10 seconds.
•
connect to device using TSensor software. TSensor software will forward you
to web interface. On the web interface you can set your device according to
requirements.
