IE-SNC-P2520-02
28
Measuring range:
0 to 25 mA
Resolution:
1 uA
A/D converter resolution:
24bit sigma-delta
Input Impedance:
20
Ω
Maximum overload current:
30 mA
Current load for +U1 and +U2 terminals:
max. 40 mA each
terminals are connected to supply voltage via PTC thermistors
(overload protection). Output voltage depends on actual current
load, it is approximately about 1.2 V lower than supply voltage.
Communication port:
RJ45 connector
–
galvanically isolated from communication line,
10Base-T/100Base-TX Ethernet (Auto-Sensing)
Recommended Connector Cable:
for industrial use there is recommended Cat5e STP cable, in less
demanding applications can be replaced by Cat5 cable, maximum
cable length 100 m
Supported protocols:
TCP/IP, UDP/IP, ARP, ICMP, DHCP
HTTP, SMTP, SNMPv1, ModbusTCP, SNTP, XML, JSON,
SOAPv1.1, Syslog
SMTP protocol:
SMTP authentication
–
AUTH LOGIN
Encryption (SSL/TLS/STARTTLS) is not supported
Supported web browsers:
Mozilla Firefox 87 and later, Google Chrome 89 and later, Microsoft
Edge 89 and later. Device should be also compatible with other
browsers. Functionality wasn't tested with other web browsers.
Recommended minimum screen resolution:
1024 x 768
Memory:
1000 values for each channel inside non-backup RAM memory
Case material:
