IE-SNC-P2520-02
24
Syslog
The device allows sending text message to selected Syslog server. Events are send using
UDP
protocol on
port 514
. Syslog protocol implantation is according to RFC5424 and RFC5426.
Events when Syslog messages are send:
Text
Event
Sensor - fw 7-5-x.x
Reset of the device
Settings changed
Settings was changed
NTP synchronization error
NTP synchronization error
Testing message
Test Syslog message
Email dns error
E-mail sending error
Email login error
Email auth error
Email some error
Email socket error
SOAP file not found
SOAP message sending error
SOAP dns error
SOAP host error
SOAP sock error
SOAP delivery error
High alarm CHx
Upper alarm on channel
Low alarm CHx
Lower alarm on channel
Clearing CHx
Clearing alarm on channel
Error CHx
Measuring error
SNTP
The device allows time synchronization with NTP (SNTP) server. SNMP protocol version
3.0 is supported (RFC1305). Time synchronization is made every 24 hours. Time
synchronization every hour can be enabled. For time synchronization it is necessary set IP
address to the SNTP server. It is also possible set GMT offset for correct time zone. Time
is used in graphs and history CSV files. Maximum jitter between two synchronization of time
is 90sec at 24 hours interval.
