Step 2: IP Settings for IPTEL-H / IPTEL-S / IPTEL-M with Static IP
A.
Prepare for IPTEL IP Address, Subnet Mask, and Router IP Address.
(*)
B.
Pick up the phone, and you should hear a dial tone.
C.
Press
#11 + IP Address
to enter IPTEL IP address
Example:
Press
#11061020102004
if IPTEL static IP address is
61.20.102.4
D.
Press
#12 + Subnet Mask
to enter the subnet mask
Example:
Press
#12255255255000
if subnet mask is
255.255.255.0
E.
Press
#13 + Router IP Address
to enter the Router IP address
Example: Press
#13061020102254
if Router IP address is
61.20.102.254
(*)
Note that the static IP address is available from your Internet Service Provider. When
connected with NAT router as above for ADSL dynamic IP, the IP Address, Subnet Mask,
and Router IP Address are 192.168.1.150, 255.255.255.0, and 192.168.1.254,
respectively.
Please note that you must press 3 digits for each byte of the IP
address.
Step 3: Making Point-To-Point Static IP Calls
A.
Pick up the phone, and you should hear a dial tone.
B.
Press
061066159236
to call the party with IP address of
61.66.159.236
In a moment, you should hear the ring back tone, and wait for the called party to answer,
or you will hear a busy tone when the dialed number is busy or not available.
Step 4: Making Point-To-Multiport Gateway Static IP Calls
A.
Pick up the phone, and you should hear a dial tone.
B.
Press
061219023102900
to call the VG400 gateway with static IP address
61.219.23.102
at extension port
900
.
In a moment, you should hear the ring back tone, and wait for the called party to answer,
or you will hear a busy tone when the dialed number is busy or not available.
Step 5: Making Point-To-Point Gatekeeper Dynamic IP Calls
A.
The PHONE LED should be flashing to indicate the IPTEL is successfully registered in
the Gatekeeper with IP address of #21 command.
B.
Pick up the phone, and you should hear a dial tone.
C.
Press
109
to call the party with alias phone number
109
registered in the
gatekeeper
.
The gatekeeper pre-registered alias phone number is shown at the
bottom of each IPTEL.
For more details of Gatekeeper dynamic IP calls, please refer to Chapter 9. PC Telnet
Command Modes.
