PPPoE for ADSL Dynamic IP
PPPoE (#05) allows IPTEL users to connect ADSL dynamic IP without NAT router as
follows.
For ADSL dynamic IP users, the Internet Service Provider (ISP) will provide user a
PPPoE username and a PPPoE password for connection to Internet. With the
username and the password, PPPoE will be able to get a dynamic IP from ISP. To
enter the username and the password into IPTEL, you need to run “
telnet 192.168.1.150
”
from PC Windows [Start] [Run] screen, assuming that the current IP address is
192.168.1.150. The default IP address for IPTEL is 192.168.1.150. If you forgot the
current IPTEL IP address, you may enter the new IP address from telephone set by
using #11 commands.
Example:
ADSL dynamic IP with Gatekeeper Mode registration
1. Run From PC: Telnet 192.168.1.150
2.
#051
Set PPPoE
3.
#06abc@efghijk
Enter PPPoE Username “abc@efghijk”
4.
#07xxxxxx
Enter PPPoE Password “xxxxxx”
5.
#201
Set Gatekeeper mode
6.
#21061066159237
Enter Gatekeeper IP Address “61.66.159.237”
7.
#21voip
Enter Alias Name “voip”
8.
#24123456
Enter Alias Number “123456”
9.
.
Exit to enable PPPoE
Note that the new dynamic IP from ISP will replace for the IP 192.168.1.150 after
enabling PPPoE, and the “telnet 192.168.1.150” will not be valid any more until
disabling PPPoE by pressing #050# from the telephone set.
Now your registered VOIP alias number is 123456, and you may have your friend dial
123456 to call you at this IPTEL.
11
IPTEL
PC
Telephone
ADSL Modem
IPTEL IP: 192.168.1.150 (#11)
Subnet Mask: 255.255.255.0 (#12)
Router IP: 192.168.1.254 (#13)
LAN
