Hot Line Mode Operations
Hot Line Mode (#40) allows you to make a direct call at the IP stored in N=99 memory
without dialing. When the Hot Line mode is enabled, you may pick up the phone and
the IPTEL-H / IPTEL-S / IPTEL-M will call the party directly to the preset IP
address/alias number in N=99 memory. Hot-Line Mode is very convenient for calling
to Public Switching Telephone Network (PSTN) number through Multiport Gateway FXO
port.
8.4
Hot Line Mode
Press #400# to disable Hot Line mode (default)
Press #401# to enable Hot Line mode
1.
Store the preset IP number in N=99 memory
Example: Press #99211020102110# for IP 211.20.102.110.
Example: Press #99211020102110xxx# for IP 211.20.102.110 ext “xxx”
“xxx” is the IPGATE extension port.
2.
Enable Hot Line Mode
Example: Press #401#
You will hear a dial tone for confirmation and hang up the phone to complete the
configuration.
3.
Pick up the phone. In 3 seconds, the IPTEL-H / IPTEL-S / IPTEL-M will
automatically call the preset IP number stored in N=99 memory.
4.
Note that you may disable the Hot-Line mode by picking up the phone and pressing
#400# in 3 seconds before the IPTEL-H / IPTEL-S / IPTEL-M calling out, and you will
hear a dial tone for confirmation. You may also disable Hot-Line mode by PC telnet
session in Section 8.
6
IPTEL
IPGATE
PSTN
Internet IP
Hot-Line Mode
FXO
PORT
