COMENDA AQUA+VS, Manual, Page: 43 / 112

- 15 -
Pressing the key, the version of software installed in the board is
displayed.
To scroll the next pages press the key ; the first page displayed allows to carry
out the manual flushing of the membrane; in order to carry out the operation, press
the key; the board displays “Flushing”.
The first page allows the hour counter reset by pressing the key.
The board displays “press E to rest”; pressing the key again confirms the filter
reset; the board will therefore display “Data saved”
Pressing the key again moves to the display of the hours-minutes of
remaining functioning before the filter change; from this page, pressing the key
displays the residual autonomy.
Pressing the key again moves to the display of the hours-minutes of
running since the last reset; from this page, pressing the key displays the
total litres consumed.
4.5.3 Programming pages
In order to have access to the programming pages, the key while you connec
the supply plug.
Subsequently the board will require pressing the key to confirm access to the
programming.
Scroll the programming pages with the and keys.
Each time a value is modified, press the key to confirm the change and save
the data; “Data saved” appears on the display and it returns to the programming
menu.
Mikrotec
Ver 1.02
Manual
Flush.
Flushing
T Total
0000:00
L Total
0000000
T remain
0000:00
L remain
0000000
Settings
Press E
Data
saved
Filter
Reset
Press E
to reset