COMENDA AQUA+VS, Manual, Page: 37 / 112

- 9 -
Conductivity μS
The machine must not be installed with inlet water > 1200 mS o> 35 ° dH.
WARNING
Any use of this device, which has not been stipulated in this manual, will constitute IMPROPER
USE, thereby rendering the guarantee null and void. The manufacturer WILL NOT be liable for
any damages caused by the IMPROPER USE of this device, due to negligence, failure to
follow the manual, or permitting unauthorized maintenance personnel to tamper with machine.
The device can be used by children aged less than 8 years, and by people with reduced
physical, sensory or mental capabilities, or lack of experience or knowledge, only under
surveillance or after their having received instructions about safe use and understood of the
dangers inherent in it.
2.6 GENERAL DIMENSIONS
2.7 INTERNAL LAYOUT
1. Solenoid valve
2. Min press.switch
3. Condenser
4. Anti-flooding probe
5. Vessel
6. Water inlet
7. Drain
8. Permeate
9. Vane pump
10. Anti-flooding probe
11. Motor
12. Display
13. Electronic board
14. Profine® cartridge
15. Mix and by-pass
16. Permeate collector block
17. Conductivity probe
18. Max press.switch
19. Profine® head