COMENDA AQUA+VS, Manual, Page: 36 / 112

- 8 -
W WARNING
The percentage of dissolved salts and other rejected elements is affected by the quality of
water, the temperature, the pressure and the totality of dissolved salts and it is different
depending on types of salts or elements.
The treatment of particularly turbid water or water with many impurities can clog the pre-filters
and/or membranes, causing a decline in water flow rate and quality.
You cannot treat waste water, seawater or other water in chemical, physical and
bacteriological conditions that aren't in the practical possibilities of reverse osmosis treatment
(industrial waste water or chemical processing).
2 2.5 TECHNICAL SPECIFICATIONS
AQUA+ +VS
TECHNICAL SPECIFICATIONS
Width x Depth x Height (mm)
148x561x465
Weight (kg) 20
Approved Decibel Level under normal operating conditions (dB
(A))
<70
Membranes (nr. 4) TWB2A1-1100371
Active Carbon filter external Profine® Blue small
WATER SUPPLY SPECIFICATIONS
Water type
Potable
Minimum water temperature (°C) 5
Maximum water temperature (°C) 35
Minimum inlet flow rate (l/h) 400
Maximum inlet pressure (Kpa) 600 (6 bar)
Minimum inlet pressure (Kpa) 100 (1 bar)
ENVIRONMENT SPECIFICATIONS
Maximum relative humidity (%)
90
Minimum external temperature (°C) 5
Maximum external temperature (°C) 40
POWER SUPPLY SPECIFICATIONS
Power supply type
SINGLE PHASE + GROUND
Voltage (V) 230
Frequency (Hz) 50/60
Adsorbed current (A) 1.5
Power (W) 180
electronic board fuse type (A) T3.15
PERMEATE WATER SPECIFICATIONS
Maximum flow rate at 10° C (l/h)
140
Maximum flow rate with 0.3 MPa backpressure at 15°C (l/h) c.a 75
Recovery (%) See table
CAPACITY AND SUBSTITUTION FREQUENCY
Active carbon filter Profine® Blue small
100 h
Reverse osmosis membrane Until clogging
Vane pump and solenoid valve 2000 hours with softened water
Hardness (°dH)
35
White 35±5%
22
Black 45±5% White 35±5%
6
Blue 55±5% Black 45±5%
100 700 1200