30
2
1
3
4
5
1
2
ON
1 2 3 4 6 7
5
8
cod. 114
2
S1 S2
1
3
3
2
S1 S2
1
2
3
5
6
1
2
3
1
1
2
1
4
Replacing the audio/video module with programming
restore backup
If the audio or audio/video module is replaced, the following instructions must be observed.
The procedure should be completed within one hour of removal of the old module.
Take note of the DIP-switch
settings
1.
Enter programming mode by moving
S2
DIP-switch
upwards
» the red “system busy” LED flashes for the duration of
the procedure
2.
Set special programming
114
to import all the
programming settings
3.
Press the confirm programming button
» the green “lock-release” LED will start flashing
» at the end of the backup (approx. 30 sec.):
» the green “lock-release” LED switches off
» the green “audio enabled” LED comes on for a
few seconds.
1.
Exit programming mode by moving the
S2
DIP-switch
downwards
» the red “system busy” LED switches off
2.
Reset the configuration of the DIP-switches
3.
Reattach the front panel
NEW
OLD
