47
Step 5: examine the IP address, subnet mask and default gateway on the PC.
Step 6: set the corresponding IP address, subnet mask, and default gateway on the DVR (refer
to 5.5.5 Network Setup). If the subnet mask and default gateway on DVR are the same with
those of the PC, then the IP address must be in the same network section but cannot be the
same with the used one. Otherwise, it will cause IP address conflicts. Take the figure above as
an example, the IP address should be: 192.168.0.x, wherein x cannot be 40 or 1 (including
other IP addresses currently being used) and cannot surpass 255, the subnet mask is
255.255.255.0 and the gateway is 192.168.0.1.
6.4 Control Download and Installation
After finishing the aforementioned settings, open the IE browser, input
http://192.168.1.x
(192.168.1.x is the setting IP address of the DVR) and confirm. If the http port of DVR setting
has been changed (not 80), it’s will be must to add colon + port number (assume that the
current port number is P), like
http://192.168.1.x:P
, for correct visit. Then, please click “If your
browser does not support the ActiveX to download, please click here”, the network will
download and install the control automatically.
After connecting to the internet, IE will automatically download the file to PC as follows.
The system will automatically enter GUI as follows.
