System options
Anti-jam: ON
System options
Monitoring
System options
Green LED: Armed
50
Monitoring time
The monitoring time can be set for two main sensor families:
• Burglar Alarm
This menu entry can be used to set the monitoring time for the sensors and burglar alarm devices. It sets the monitoring fault
timeout in the event that there is no valid signal originating from the sensor (monitoring or activation signals).
Time interval: from 00.01 to 23.59. Default: 21 min
• Fire
This menu entry can be used to set the monitoring time for the smoke sensors. Time interval: from 00.01 to 23.59. It sets the
monitoring fault timeout in the event that there is no valid signal originating from the sensor (monitoring or activation signals).
Time interval: from 00.01 to 23.59. Default: 21 min
Anti-jam
RF network jamming (interference) can be detected by the control panel. The detection function can be enabled or disabled using
this menu entry.
Green LED
This menu entry is used to select one of the two different functions of the green LED on the front panel.
You can choose between:
• “Power supply” status.
• “Arming” status.
System options
Panic alarm
Panic alarm
This menu entry is used to configure the type of reaction the system has to a panic alarm command:
• Silent al.: in this case no audible or visual signal will be generated, but the corresponding event will be sent to the
configured recipients.
• Audible al.: in this case the external sounder will be activated and the corresponding event will be sent to the configured
recipients.
• Personal al.: in this case the indoor sounder built into the control panel will be activated and the corresponding event will be
sent to the configured recipients.
