43
Detection Target
:
Human:
Select it and then alarms will be triggered if someone crosses the
pre-defined alarm lines.
Motor Vehicle
: Select it and then alarms will be triggered if a vehicle with four or more
wheels (eg. a car, bus or truck) crosses the pre-defined alarm lines.
Motorcycle/Bicycle
: Select it and then alarms will be triggered if a non-motor vehicle
(eg. a motorcycle or bicycle) crosses the pre-defined alarm lines.
These three types of objects can be selected simultaneously. Please select the
detection objects as needed. If no object/target is selected, alarms will not be
triggered even if line crossing detection is enabled.
2. Set the alarm holding time.
3. Set alarm trigger options. The setup steps are the same as alarm in (sensor alarm)
detection. Please refer to
chapter for details.
4. Click “Save” button to save the settings.
5. Set the alarm line of the line crossing alarm.
Click the “Area” tab to go to the
interface as shown below.
Set the alarm line number and direction. Up to 4 lines can be added. Multiple lines
cannot be added simultaneously.
Direction
：
A<->B, A->B and A<-B optional. This indicates the direction of the
intruder/vehicle crosses over the alarm line.
A<->B
: The alarm will be triggered when the intruder/vehicle crosses over the alarm
line from B to A or from A to B.
A->B
: The alarm will be triggered when the intruder/vehicle crosses over the alarm
line from A to B.
A<-B
: The alarm will be triggered when the intruder/vehicle crosses over the alarm
line from B to A.
Click the “Draw Area” button and then drag the mouse to draw a line in the image.
Click the “Stop Draw” button to stop drawing. Click the “Clear” button to delete the
lines. Click the “Save” button to save the settings.
6. Set the schedule of the line crossing alarm. The setup steps of the schedule are the
same as the schedule recording setup (See
Summary of Contents for IPTHBCAMA05F01A
Page 24: ...18...
