34
2. Click “Enable” and set the alarm holding time.
3. Trigger alarm out. When the camera is disconnected, the system will trigger the
alarm out.
5.4.3 Alarm In
To set sensor alarm (alarm in):
Go to Config
Alarm
Alarm In interface as shown below.
1. Click “Enable” and set the alarm type, alarm holding time and sensor name.
2. Set alarm trigger options.
Alarm Out:
If selected, this would trigger an external relay output that is connected to
the camera when the sensor alarm is triggered.
Trigger Audio Alarm
: If selected, the warning voice will be uttered when the sensor
alarm is triggered. (Please set the warning voice first. See
for details).
Trigger Light Alarm
: If selected, the light of the camera will flash when the sensor
alarm is triggered. (Please set the light flashing time and frequency first. See
Trigger SD Snap:
If selected, the system will capture images when the sensor alarm
is triggered and save the images on the micro-SD card.
Trigger SD Recording:
If selected, video will be recorded on the micro-SD card when
the sensor alarm is triggered.
Trigger Email
: If
“Trigger Email” and “Attach Picture” are checked (email address
Summary of Contents for IPTHBCAMA05F01A
Page 24: ...18...
