User’s Manual
Motion Detection
Check the
Motion Detection
box to set up a motion detection event. When the camera
detects a motion in a configured motion detection zone, it considers the motion as an event.
Sensitivity
: Set the motion sensitivity for daytime and nighttime independently.
Minimum Portion
: Adjust the minimum percentage of detection blocks that must be
activated in order to be considered as a motion event for daytime and nighttime
independently.
Motion Zone
: Click the
Setup…
button and a motion detection zone setup screen appears.
Define the area (max. four) of the image that you want to set up a motion detection zone
by using the motion detection zone icons.
(Select) or
(Clear): Click to select or clear a block for motion detection. You can select
or clear the several blocks of an area using the mouse dragging.
Motion Ignoring Interval
: Select the motion ignoring dwell time from the drop-down
list. The camera will not send notifications of motion events occurring during the preset
interval after a motion is detected. You can control excessive remote notifications of motion
detection events by adjusting the motion ignoring dwell intervals.
Daytime
: Set up the daytime range. The camera will consider the remaining time range
as the nighttime.
Event Action
: Check the box for each action the camera is to take when it detects a motion
detection event.
Alarm Out
: Check the box to trigger an alarm-output signal.
Send Email
: Check the box to send an email. Selecting
Image Attachment
attaches an
event detected image file (.JPG) to the email.
30
