Network Camera
29
Alarm In
Check the
Alarm In
box to set up an alarm-in event. When the camera senses an input on
the alarm input connector, it considers it as an event.
Title
: Enter the alarm-in device’s name.
Type
: Select the alarm-in type.
Event Action
: Check the box for each action the camera will take whenever it detects
an alarm-in event.
Alarm Out
: Check the box to trigger an alarm-output signal.
Send Email
: Check the box to send an email. Selecting
Image Attachment
attaches an
event detected image file (.JPG) to the email.
Remote Callback
: Check the box and select the remote systems to send a message (Not
supported for the WebGuard program).
FTP Upload:
Check the box to upload images to an ftp server.
Move PTZ to
: Select the desired preset number that you want the camera to move to. You
must set preset locations for the camera using remote programs or a web browser.
NOTE: You must properly configure the settings related to each event action when setting
them up to enable event actions. Refer to 3.6 Event Action.
