Comelit 1998VC, Technical Manual

Page: 13 / 29

13
14 :15 : 26
Mon 12 Mar 12
• System
• Services
3. use the keys to view the Link menu, press OK ;
14 :15 : 26
Mon 12 Mar 12
System
Simplebus
Link Slave in series
Call Simplebus
A/V Audio
Backwards com.
Esc Ok
4. select the Master in series using the keys to confirm
that the switchboard should be active.
» The other switchboard will be deactivated
automatically, to become the Slave in series.
5. press OK to confirm the settings;
f press ESC repeatedly to return to the main screen.
U12 How to use the lock-release
The external unit electric lock can be controlled by pressing
key ; if the command is executed a confirmation tone
sounds.
U13 How to activate the “Follow Me” function
(FollowMe)
This function can be used to divert calls for the switchboard
to local or remote telephones.
CAUTION! To use this function, telephone switchboard
Art. 2906 and interface Art. 2912 must be fitted. Contact
your usual installer.
This function can only activated for the switchboard set
as secondary (see ”C1 - Type of switchboard (Simplebus
Top mode)” ).
To activate this function:
1. press the MENU key and use the keys to view the
Configurations menu, press OK ;
14 :15 : 26
Mon 12 Mar 12
• Settings
• Configurations
• Directory
• Received calls
• Alarms
2. use the keys to view the Services menu, press OK ;
14 :15 : 26
Mon 12 Mar 12
• System
• Services
3. use the keys to view the FollowMe service.
4. Activate the service using the key.
Disable it using .
14 :15 : 26
Mon 12 Mar 12
FollowMe
Call repeat
Internal units on
Triple call
Codes help
Esc Ok
f press OK to confirm the settings;
f
press ESC repeatedly to return to the main screen.
Once a call has been made, the switchboard will ring until
the remote device begins communicating; the call can be
answered from the switchboard by cancelling the “Follow me”
function.
U14 How to activate an additional relay (e.g. to activate
independently using a specific command: lights, CCTV
alarm contacts, vehicle barriers, entrances without an
external unit or other devices)
Actuators can be activated in standby mode and during
conversation with an external unit.
CAUTION! To use this function, there must be a main
external unit and actuators Art. 1256. Contact your usual
installer.
To activate the actuator:
f
press , you will be asked to enter the code to activate a
specific actuator. If there is no code a generic actuator will
be activated;
14:15:26
Mon 12 Mar 12
Actuator code _________
For actuator
f to confirm actuator activation, press .