25
INSTALLER CONFIGURATIONS
This section is aimed at qualified technicians who, after
installing the product, will program the porter switchboard
using guided menus, which can be viewed on the display by
navigating the main menu.
C1 - Type of switchboard (Simplebus Top mode)
The switchboard may be secondary or main.
• Set
Simplebus
when the switchboard is used as
secondary, as output from the LM-LM terminals of
switching devices Art. 1424 (Simplebus TOP system) (see
is used in Simplebus systems with switching devices Art.
1224A or in a system with a single riser and no switching
devices.
CAUTION! the secondary switchboard cannot be
configured as a switchboard in parallel.
• Set Simplebus top when the switchboard is used as main
in a Simplebus top system, and therefore positioned
upline of switching devices Art. 1424 marking the zones/
The secondary or main switchboard must then be configured
as:
1- SINGLE
2- PARALLEL
3- SERIES.
1.
Select
single
when the switchboard is the only one in the
system, or the only one serving a specific riser.
2.
If there are 2 main or secondary switchboards serving
the same riser, the parallel configuration means that both
switchboards will be operating with the same functions
(see
).
»
The first of the two to answer a call will preclude
the possibility of the other one performing the same
procedure.
»
If one of the 2 devices is switched on or off, the other
will automatically follow suit.
f
Set the switchboard connected under the LS-LS line
of switching device Art. 1424 as
Parall
.
LS-IN
; set
the switchboard located under the LPin-LPin line of
switching device Art. 1424 as
Parall
.
LP-IN
.
For the parallel switchboard, switching to NIGHT and
the AUTOMATIC DAY/NIGHT function is not possible
A
P
should appear on the standby screen of the two
switchboards, indicating that the switchboard is
configured in parallel, in addition to the fixed icon .
3.
If there are 2 main or secondary switchboards serving the
same riser, the
series
configuration means that only 1 of
the 2 can operate at one time
(Master in series)
, while the
other is deactivated
(Slave in series)
).
f
To change a switchboard from master to slave and
”U11 How to activate or deactivate
»
An
S
should appear on the standby screen of the two
switchboards, indicating that the switchboard is
configured in series, in addition to the fixed icon .
CAUTION!
»
if flashes, it is indicating that the 2 switchboards are not
communicating correctly.
» if the icon ! appears, there is a problem with the
configuration of the 2 switchboards (e.g. both master
or slave in series, Parall. LP-IN or Parall. LS-IN or one in
series and the other parallel).
» if in a Simplebus TOP system (with switching devices Art.
1424), both main and secondary switchboards are present
(see
)
; for correct system
operation the setting
”C5 - Backwards compatibility”
must be activated on all switchboards.
Installer configurations
• System
System
Simplebus
Simplebus Top
Link
Single
Parall. LS-IN Parall. LP-IN
Master in series
Slave in series
Call
Simplebus
Indirect
A/V
Audio
Video
Backwards com.
Configurations
• Services
FollowMe
Call repeat
Internal units on
Triple call
Codes help
