Comdial GCA70-33, User Manual

Page: 41 / 54

Adding Wireless Extensions
This feature allows you to add a wireless extension to a guest room during or after check in.
Concierge treats a wireless extension as a data extension; it rings when the room extension
rings and appears on the guest bill. When a guest checks out, the system automatically removes
the wireless extension.
When you use an administrative telephone to make or receive a call from a data extension, the
guest’s name shows on the LCD when this option is set by the installer. For the name to show,
the administrative telephone must not be in administrative mode.
To add a data wireless extension to a room, a guest must be checked in to the room. The
wireless extension you are assigning to the room must not be identified as any other extension
type.
To add a wireless extension to a room,
1. From an enabled administrative telephone, select the room.
2. Press
OAI 15
.
3. Press the
Add
soft key.
4. Enter the extension number you want to assign to the room.
5. Press the
Enter
soft key.
Heartbeat Feature
This installer-programmed (through button mapping on the digital communications system)
feature causes an LED on the administrative telephones (OAI 20) to flash at two-second
intervals to indicate the Concierge system is communicating with the telephone system. If the
Concierge PC or its serial link to the telephone system malfunctions, the indicator will turn off
or be on steady.
Front Desk Attendant's Guide – 37
GCA70–334 Administrative Telephone Interface