18
RNG200N OPERATOR’S MANUAL (501-3337900) B783
DRAFT
MAKING USER SETTINGS (cont.)
Making HDMI Settings
You can use the HDMI Settings menu to choose an Audio Output Mode, and to enable or disable automatic
detection of a newly connected HDTV (if it is connected by an HDMI cable).
If you have not done so already, put your set-top into User Settings mode, as described on page 14.
1. Press the
U
or
D
button until the front panel shows “hdni”.
On the USER SETTINGS menu, HDMI Settings is highlighted when “hdni” is on the front panel.
2. Press the
R
button. The HDMI Settings menu appears (see right).
3. Press the
U
or
D
button to highlight “Audio Output Mode” or “Disable Auto Detect” as required.
4. Use the
OK/Select
button to choose the setting you want (the setting changes each time you press
OK/
Select
).
Audio Output Mode has three possible settings:
“Auto” (provides the audio format best suited to the connected equipment)
“L-PCM” (provides PCM audio only)
“Pass Through” (does not change the audio format)
Disable Auto Detect is either “YES” or “NO”.
5. When you have made all the changes you want, press
L
to redisplay the USER SETTINGS menu.
Removing the User Settings menus
When you have finished making all the user settings you wish to make, press the
POWER
button to remove
the USER SETTINGS menu and return to regular viewing.
HDMI Settings
Audio Output Mode : Auto
Disable Auto Detect : NO
