6
www.combisteel.com
4. Usage of coolers
For 7464.0315 and 7464.0320:
These coolers have been designed to prevent any contact with air from outside thanks to an air curtain.
The products to be cooled should be placed on the base section and shelves. The products placed on the base
should not hinder absorbance vent.
Cooler should not be placed near those areas with high air circulation (such as in front of an air conditioner,
under air channel, etc.).
Food stuff to be cooled should be placed in a manner not to hinder air circulation. Otherwise there might be
great temperature differences between lower and upper sections of the cooler.
A heater is placed inside vaporization container on the lower section of the cooler. When the water level reaches
to contact such heater, a sizzling sound is produced. Such sound is due to the heating of water but not due to a
failure.
For 7464.0300, 7464.0305 and 7464.0310:
Place the products to be cooled onto the shelves.
Avoid blocking the suction vent by the products placed onto the shelves.
Don’t place the refrigerator close to the points having more air circulation (such as in front of an air conditioner,
under air channel, etc.).
Food stuff to be cooled should be placed in a manner not to hinder air circulation. Otherwise there might be
great temperature differences between lower and upper sections of the cooler.
There is no power on/off button on the cooler. Light illuminates at all times. The replacement of fluorescent tube
can be made by opening the white panel. It is recommended to replace the fluorescent lamp and starter at the
same time.
There is no defrosting timing for this product.
Summary of Contents for 7464.03 Series
Page 4: ...4 www combisteel com...
