4
www.combisteel.com
Operation
1.
Before the ignition of the oven, remove the protective film and all polyfoam inside the chamber.
2.
Turn on the main switch to position “1”.
3.
Turn upper and lower thermo-control desired temperature. Power indicator lights up when the heating
element works. The light turns off if the desired temperature is reached. The heating element is
automatically switched on if the chamber temperature is lower than the desired setting temperature. At the
same time the indication light turns on if the heating element is working again.
4.
Check the chamber temperature by thermometer for EPZ-4/6/8/12 series. For EPZ-218, it is a timer for
cooking purposes.
5.
Check on the Pizza or food by turning on the chamber light.
6.
In the left hand side of the door, push staff ball to close the exhaust window or pull staff ball to open exhaust
window for different cooking purposes.
7.
To switch off the oven, turn the main switch to position “0”.
Maintenance
Before executing any kind of maintenance, including cleaning, you must disconnect the oven electrically and wait
for the complete cooling.
In the case of malfunction or damage to the oven, you must apply for authorized assistance, from the
manufacturer or authorized dealer.
Cleaning – The cleaning must be done every time the oven has been used following all the rules to prevent
malfunctioning of the oven and for hygienic purposes. Using a suitable spatula and soft metal brush, remove the
cooking residues from the fire stone, which should then be removed with an aspirator.
Trouble shooting
Specification
Model
Temperature
range
Outside dimension
(mm)
Chamber dimension
(mm)
Rated voltage
(V)
Rated Power
(KW)
7455.1095
0~350
℃
690X680X400
502X500X115
220
3
7455.1100
0~450
℃
975x915x745
660X690X135
380
9
7455.1090
0~450
℃
975x1210x415
660X1020X135
380
6.9
7455.1105
0~450
℃
975x1210x745
660X1020X135
380
13.8
Problem
Possible solution
No heating
1.Check if electrical wiring is correctly connected.
2 Set the upper and bottom thermocontrol to the desired temperature.
3 Correct input voltage or phase.
4 Call authorized dealer with other problems.
Electric shock
Stop using the oven and call authorized dealer for service.
No light in chamber
Turn on the chamber or call authorized dealer to replace bulb.
Bad burning smell
Call authorized dealer to check electrical circuit.
Uneven cooking
Re-et upper and bottom thermocontrol.
Or call authorized dealer to check whether the heating element is burnt and replace
it.
