Combi Zeus 360, Instruction Manual

Page: 22 / 30

17b. Changing Shoulder Harness Positions
Rear-facing - Shoulder harness straps must be through
harness slots at or just below child’s
shoulders.
- Use the top, middle or lowest sets
of harness slots for rear-facing (fig. e) .
Forward-facing - Shoulder harness straps must be at or
above shoulders.
- Use only the middle or top harness slots
for forward-facing (fig. f) .
- Discontinue use of car seat if child’s
shoulders are above top harness slots.
Removal of shoulder harness covers:
a. Unsnap shoulder harness covers (fig. g) .
b. Remove shoulder harness covers from shoulder
harness straps (fig. h) .
41
(fig. g)
Shoulder
Harness
Cover
(fig. h)
Shoulder
Harness
Strap
Middle Harness
Slots
(fig. e)
Rear-facing
Lowest Harness
Slots
1
Top Harness
Slots
Middle Harness
Slots
Top Harness
Slots
(fig. b)
Forward-facing
Removal of shoulder harness straps:
a. Buckle shoulder harness and unbuckle chest clip.
b. Remove shoulder harness straps.
1. Lengthen shoulder harness straps to maximum length.
- From front of car seat, grasp shoulder harness
straps (fig. g) .
- While pressing down on harness adjuster, pull
shoulder harness straps out as far as possible.
2. Rotate car seat into rear-facing position, see “Changing
Car Seat Use Position” section (fig. h) .
3. Remove harness shield from back of car seat (fig. j) .
- Pull tabs at top and bottom corners of harness shield
out of slots in car seat.
42
(fig. h)
(fig. j)
Harness
Shield
(fig. g)
Harness
Adjuster
Tab
2